Cozzia EC366 Bedienungsanleitung PDF herunterladen

21 10

11 20

19 12

13 18

1615

Table of Contents

Thank you for purchasing the EC-366 Spa Massage Chair.

Before using your massage chair, please read the contents of this instruction

manual and refer to it when needed.

Spa Features ........................................................ 2

Safety Precautions .............................................. 3-4

Chair Components .............................................. 5-6

Chair Installation & Moving .................................. 7-12

Chair Specifications ............................................. 13

Operation Guide ................................................... 14-22

Troubleshooting & Product Maintenance ............. 23

Warnings .............................................................. 24

COZZIA Consumer Warranty ............................... 25-27

Warranty Card (Attachment)

Spa Features

Spa massage includes: Shiatsu (acupressure), kneading, rolling, clapping, tapping,

stretch, swedish, heating, vibration, dual-action and tri-action techniques.

● An exclusive SPA massage treatment imitated through combined massage

functions.

● Wonderful stretching adjustment in calves.

● Innovative auto scanning technology in backrest automatically or manually

customizes a personal massage specifically for each user.

● Invigorating air pressure system in back, seat, armrest and footrest.

● Heated backrest in lower lumbar area.

● Six pre-programmed massage sessions with customizable strength, speed

and intensity.

● Ability to customize massage by controlling speed, adjusting rollers and

choosing partial massage areas.

● Three partial massage options in upper, middle and lower back.

● Narrow or wide back massage adjustment.

● Extended footrest automatically adjusts to fit user’s height.

● Automatic angle adjustment in back and footrest.

● Programmable timer with 5-30 minutes automatic shut-off and pause mode.

● User-friendly LCD remote control with graphic interface.

● Ergonomically designed for optimum comfort.

EC-366 Spa Massage Chair

The Spa Massage Chair is controlled by a microcomputer that performs a variety of

intelligent massage techniques and combinations that are designed to soothe sore

muscles, alleviate stress and fatigue, increase metabolism and energy, and improve

blood circulation.

Chair Components

Remote Controller

Pillow Pad

Spare Pad

Backrest

Arm Massage

Socket Point

Wheel

Seat Pad

Footrest

Legrest

Calves Rest

Armrest

Controller Stand

MASSAGING POSITION

Chair Installation

Step 1:

When setting up the chair, make sure there is at least three feet of space behind

the backrest and three feet of space in front of the footrest.

PIC 1

PIC 2

PIC 3

PIC 4

Attach the connecting rod and the U stay fork of the reclining actuator with a flat

head rivet, and secure with a split pin as demonstrated in PIC 1 and PIC 2.

A. Connecting rod (on the backrest)

B. U stay fork of reclining actuator (on the seat)

C. Flat head rivet

D. Split pin

Step 3:

Insert the wire plugs into the seat as demonstrated in PIC 3.

Note: Insert black to black and gray to gray, otherwise damage to the chair may

result.

Step 4:

Unfold the backrest until you hear a “click” sound.

Moving the chair

1. Restore the footrest to its original position.

2. Recline the chair to tilt approximate 45 degrees. Move the chair using the

wheels as the fulcrum.

Note:

1. Always return the footrest to its original length and restore it to its original position

before moving the chair. Otherwise,injury during movement may result.

2. Do not move the chair while a person is seated on it.

3. Place a mat on the floor and gently roll the chair over it to avoid damaging the floor.

Chair Specifications

Description

Specifications

Operation Guide

Model No.

Rated Voltage

Rated Frequency

Rated Power Consumption

Timer

Max Time Rate

EC-366

110V ~

60Hz

280W Max

5, 10, 15, 20, 25, 30 minutes

60 minutes

Shipping dimensions (Seat):

48" x 30" x 29"

Shipping dimensions (Backrest): 44” x 25.5” x 16”

Upright dimensions: 53.5" x 29" x 48"

Reclined dimensions: 72" x 29" x 26"

Seat part net weight: 160 lbs

Seat part gross weight: 201 lbs

Backrest part net weight: 51 lbs

Backrest part gross weight: 68 lbs

Controller wire: 1.3 m

Power supply wire: 2.2 m

Temperature: 10°C~40°C

Humidity: 30~85 RH

Temperature: 20°C~60°C

Humidity: 30~85 RH

Dimensions (LxWxH)

Weight

Length of Wire

Usage Condition

Storage Condition

Side panel

at least 3 ft.

Insert the power plug into an electrical outlet.

Turn the power switch to “I” position for idle mode.

The following functions are available in idle mode: ON/OFF, Backlight, Recline, Sit Up,

Lift Leg, Recline Leg.

Massage Chair Control Buttons

1. ON/OFF

Start/Stop Control Button

Press this button and the backlight of the remote controller will blink to indicate that the

massage chair is in idle mode. Then press any function button to activate the massage

chair operations.

Press the ON/OFF button again to stop all massage functions and to return the

massage rollers to their original position. The backrest and Footrest will return to its

original position.

2/3. Recline/Sit up

Backrest and Legrest Angle Adjustment Control Button

Hold one of these buttons to adjust the backrest and the legrest to a comfortable

position.

4/5. Lift Leg/Recline Leg

Legrest Angle Adjustment Control Button

Hold one of these buttons to adjust the legrest to a comfortable position.

6. Backlight

Backlight ON/OFF Control Button

Press this button to turn on and turn off the controller backlight. The backlight

automatically turns off after two minutes.

Note: Before the Backlight function is activated, pressing any function button will also

activate the Backlight, and the backlight automatically turns off after two minutes.

7. Timer

Time Interval Control Button

When a massage function is activated the time is automatically set for 15-minute.

Every time this button is pressed, the time interval will change in the following sequence:

20>25>30>5>10>15- minutes.

Note: The backlight of the remote controller will automatically light up followed by five

beeps when one minute remains on the timer.

8. Pause

Pause Control Button

Press this button to stop all massage functions and pause the chair to idle mode.

Press the pause button again to resume the original massage function.

9. Point Navi

This chair is equipped with a Point Navi function that the massage rollers can be

adjusted according to the user’s preference for a more effective massage during auto

programs. Combined with these Upward and Downward manual control buttons, it can

help provide more precise massages at precise points for more effective and in-depth

massages.

Every time this button is pressed, the massage rollers will stop at the pre-programmed

position and the machine will beep. This position can be changed within the machine

beeps 5 times. Once the machine beeps 8 times, it means that the highest massage

position for the auto programs will be the pre-programmed position.

10/11. ▲/▼

Manual Backrest UP/Down Control Buttons

For more comprehensive and comfortable massage, the user can further adjust the

height of the massage by pressing this button within 5 seconds after the beeps. The

Massage Rollers will go upwards or downwards according to your request until the most

suitable position is reached. This adjustment request is set when you let go of the button

and the manual adjustment is achieved.

Note: All four auto programs-HEALTHCARE, RELAX, SMART, SPA are equipped with

point Navi functions. For details, please refer to “Auto Program” section.

Auto Program

After activating the auto programs, the vibration function for seat can be activated

according to individual needs.

Full Body Auto Program

Auto program includes HEALTHCARE, RELAX, SMART and SPA programs.

Press any of these buttons and the chair will automatically adjust the massage rollers to

the pre-programmed position. At the same time the user can manually adjust the

massage height to the preferred level within 5 seconds after the beeps.

12. Healthcare

Strong and powerful mechanical massage functions through tapping, kneading,

clapping, rolling, Shiatsu and combined massage programs help stimulate different

acupuncture points on the body to revitalize and alleviate tensed muscles and body

aches.

13. Relax

Soft mechanical and air squeeze massage function with lower speed and strength

modes to stimulate muscles through continuous rolling, tapping, kneading and other

massage functions to relax muscles. An ideal massage mode prior to sleep.

14. Smart

Combination of air squeeze and leg-stretching function, the calves rest of the massage

chair can be straightened and extended to stretch calves and knees, as well as lower

body muscles and nerves to improve blood circulation.

15. SPA

Through combined massage functions: vibration (Jacuzzi)-Heating (Sauna)-Air

squeeze and Mechanical massages (human massage), one can enjoy a relaxing

massage similar to an exclusive SPA massage treatment. Comfortable Vibration

function on the seat areas improves blood circulation. Also, the Heating function can

effectively soothe osteoarthritis, tiredness and joint pains.

Localized Auto Program

A precise massage on a specific part of the body.

16. Full Back

Full Back Massage Start/Stop Control Button

-Neck/Shoulder

-Back/Lumber

17. Lower Body

Lower Body Massage Start/Stop Control Button

Note: The Auto Program of Full Back can be combined with the Auto program of lower

Body for richer Full Body Auto Massage mode.

18/19. Length Adjustment Control Button for Leg-rest

These two control buttons can adjust the length of the legrest. Hold the Elongate or

Withdraw control button to adjust the legrest to a comfortable length. Hold the Elongate

or Withdraw control button again to confirm the length.

20. Length Adjustment Control Button for Footrest

This SPA chair is equipped with an Auto function to enable the length of Footrest to

be adjusted to the user’s Leg-rest length for a more effective massage. Every time

the button is pressed, the Auto function will detect the best massage length.

Spot or Localized Back Massages

21. Spot

Spot Back Massage

Press this button once to activate the massage rollers.

Press the ▲ or ▼ button to select a spot massage for any part of the back.

Press the button again to stop the spot massage function and to resume the full back

massage function.

Note: The spot massage is not operable when the rolling function is activated.

22. Partial

Partial Back Massage

Press this button once to activate the massage rollers. The massage rollers perform the

partial massage with an 8 cm(3.1”) range of movement.

Press the ▲ or ▼ button to select a partial massage for any part of the back.

Press the button again to stop the partial massage function and to resume the full back

massage function.

23/24. ▲/▼

Position Adjustment Buttons for Spot or Partial Massage

When the spot or partial massage functions are activated these buttons will move the

massage rollers.

Press and hold the ▲ or ▼ button to move the massage rollers up or down.

Release the ▲ or ▼ button when the desired position is achieved.

Setting Air Squeeze

25. AUTO

Auto Air Squeeze Control Button

Press this button once to activate the seat, back, arms, feet and calves auto air squeeze

function. Press the button again to stop the auto air squeeze function.

26. Intensity

Air Squeeze Intensity Adjustment Control Button – 4 levels of Intensity

Press this button to adjust the intensity of the air squeeze function while the air squeeze

functions are activated.

27. Arms

Arms Air Squeeze Start/Stop Control Button

Press this button once to activate the arms air squeeze function.

Press the button again to stop the arms air squeeze function.

28. Back/Seat

Back and Seat Air Squeeze Start/Stop Control Button

Press this button once to activate the back and seat air squeeze functions.

Press the button again to stop the back and seat air squeeze functions.

29. Feet

Feet Air Squeeze Start/Stop Control Button

Press this button once to activate the feet air squeeze function.

Press the button again to stop the feet air squeeze function.

30. Calves

Calves Air Squeeze Start/Stop Control Button

Press this button once to activate the calves air squeeze function.

Press the button again to stop the calves squeeze function.

Note: All Air squeeze control buttons have two mode selects. Press again if you want to

change the mode.

Manual Back Massage

31. Vibration

Vibration Function Stat/Stop Control Button

Press this button once to activate the vibration for a full back massage.

Press the button again to stop the vibration massage function.

32. Stretch

Stretch Function Start/Stop Control Button

Press this button once to activate the stretch function. The air bags of calves and legs

will inflate to stretch out and draw back (pace up and down).

Press the button again to stop the stretch function.

33. Kneading

Kneading Function Start/Stop Control Button- 2 modes (KNEADING1/ KNEADING2); 4

levels of speed

Press this button once to activate the kneading function for a full back massage at

medium intensity.

Press the button again to stop the kneading massage function.

Press the KNEADING 1 or the KNEADING 2 button to select the mode desired.

Note: This function can be combined with Tapping, clapping and Shiatsu to enjoy

multi-massage functions.

34. Tapping

Tapping Function Start/Stop Control Button - 2 modes (TAPPING 1/ TAPPING 2); 3

levels of width (narrow, medium, wide); 4 levels of speed.

Press this button once to activate the tapping function for a full back massage at

medium intensity.

Press the button again to stop the tapping massage function.

Press the TAPPING 1 or the TAPPING 2 button to select the mode desired.

35. Clapping

Clapping Function Start/Stop Control Button -2 modes (CLAPPING 1/ CLAPPING 2);

3 levels of width (narrow, medium, wide); 4 levels of speed

Press this button once to activate clapping function for a full back massage at medium

intensity.

Press the button again to stop the clapping massage function.

Press the CLAPPING 1/ CLAPPING 2 button to select the mode desired.

36. Shiatsu

Shiatsu Function Start/Stop Control Button-2 modes (SHIATSU 1/ SHIATSU 2) ; 3 levels

of width (narrow, medium, wide); 4 levels of speed

Press this button once to activate the Shiatsu function for a full back massage at

medium intensity.

Press the button again to stop the Shiatsu massage function.

Press the SHIATSU 1 or the SHIATSU 2 button to select the mode desired.

37. Rolling

Rolling Function Start/Stop Control Button-3 levels of width (narrow, medium, wide)

Press this button once to activate the rolling function for a full back massage.

Press the button again to stop the rolling massage function.

Note: Tapping, clapping, Shiatsu, Swedish and spot functions cannot be combined with

the rolling function.

38. Strength

Kneading Speed Adjustment Control Button

Press this button to adjust the speed when the kneading function is activated.

39. Speed

Speed Adjustment Control Button

Press this button to adjust the speed when the tapping, clapping and Shiatsu functions

are activated.

40. Width

Width Adjustment Control Button

Press this button to adjust the width when the tapping, clapping, Shiatsu and rolling

functions are activated.

Waist Heating Function

41. Heating

Heating Function Start/Stop Control Button

Press this button once to activate the heating function for the waist.

Press the button again to stop the heating function.

Setting Seat Vibration

42. Vibration

Vibration Function Start/Stop Control Button-2 modes (SEAT VIBRATION 1/ SEAT

VIBRATION 2) ; 4 levels of speed

Press this button once to activate the Vibration function for seat.

Press the button again to stop the vibration massage function.

Press the SEAT VIBRATION 1 or the SEAT VIBRATION 2 button to select the mode

desired.

43. Stop

Press this button to stop all massage functions. The massage rollers will resume their

original position.

Switch the power button under the chair to the “O” position and disconnect the power

cord plug from the electrical outlet.

Seat Raising Button (optional)

There is a red button on the side of the right armrest. This button only is used after the

user presses the ON/OFF button and stops the massage. Press this button and the seat

will be raised slowly to help the user stand up. Please be patient as it may take about 30

seconds. This function is built-in especially for the elderly or for those suffering from

osteoarthritis. After the seat is raised fully, it will return slowly to the original position.

Switch the power button under the chair to the “O” position and disconnect the power

cord plug from the electrical outlet.

Note: When press this button, the power

switch should be “I” position for idle mode.

Troubleshooting & Product Maintenance

This massage chair is controlled by a microcomputer and is susceptible to power

surges of +10 to -10%.

The following situations may display in the event of a power surge:

1. Make sure the chair is plugged

into a working outlet.

2. Turn the power OFF and then ON

again.

1. Check to see that the plug is well

connected and working.

2. Make sure that the massage chair

switch is turned to the “I” position.

The massage chair is connected

to the power supply but is not

functioning.

The remote control works, but the

massage chair is not functioning.

The massage chair may have

overheated due to prolonged use.

Turn off the power and allow the chair

to cool for 30-50 minutes.

Both the remote control and the

massage chair are not functioning.

Situation Solution

Instruction Manual EC-366

Step 7:

Repeat Step 5 to install left arm

massage components.

Install the remote controller stand by

tightening the screws (long ones) as

demonstrated in PIC 6.

Step 6:

Install the right arm massage cover

by tightening the screws (short ones)

as demonstrated in PIC 5, then cover

the screws with the rectangle cap.

Step 8: (Optional)

Remove the spare pad located in

backrest cover for a deeper massage.

Note: The spare pad has been

inserted into the backrest cover. If

strong massage is desired, remove

the spare pad from the cover to

strengthen the massage. If milder

massages are desired, insert the

spare pad into the cover to lessen the

strength of the massage.

Step 2:

Lift the backrest, then lower the backrest into the seat brackets, Securely lock the

flat head bolts into sides of the seat.

Note: Carefully unwrap the armrest to avoid scratching during installation.

A: Flat Head Bolt (on the backrest)

B: Holder (on the seat part)

Step 5:

Install the right arm massage

components by tightening the

screws (short ones) and insert the

air hose to the arm-rest as

demonstrated in PIC 4.

PIC 5

PIC 6

Grey Black

Warnings

PIC 2

COZZIA Consumer Warranty

COZZIA products have the following warranty:

COZZIA’s massage chairs,

motion upholstery and home theater massage seating provide a one year in-home

service warranty and a two-year parts warranty. COZZIA customer service will not

issue Return Material Authorizations (RMAs) for products. COZZIA products will be

either repaired by the consumer or by an in-home technician. COZZIA will not issue

Return Material Authorizations (RMAs) for buyer’s remorse.

SERVICE AND TECHNICAL SUPPORT

Consumers may contact COZZIA’s customer service department at

1-877-977-0656

between 9:00 am and 5:00 pm PST, Monday through Friday for warranty or service

issues.

Consumers are required to provide the unit serial number and dated proof of

purchase (sales receipt) when they contact the COZZIA service department

regarding a repair.

A COZZIA customer service representative will attend to most consumer inquiries, but

in some cases a technical service specialist will provide advanced support.

Non-warranty repair is provided on a "per incident" basis. COZZIA customer service

will verify that the unit has failed and provide instructions for repairing a unit. All

applicable repairs, parts, shipping, handling, local tax and a "per incident" fee will be

charged for non-warranty repairs and support calls.

Proof of purchase (original receipt) is required for all warranty repairs or service.

PRODUCT REPAIRS

Many COZZIA product repairs may be performed by the consumer in their own

home with parts and instructions supplied by COZZIA such as remote controller

replacements that don’t require a technician.

27 4

●

Floor Models and Demonstration Units

have a prorated warranty period

that begins the day the model is placed on the floor and connected to an

electrical outlet by the retail partner. Proof of purchase is required in order

to obtain warranty service and parts. Non-warranty parts and service are

available at a “per incident” charge.

●

Warranty Coverage Period

- Warranty coverage starts at the time that the

consumer PURCHASES their chair. Proof of purchase is required for all

warranty repairs. The warranty time period is measured by continuous

calendar days based on a seven-day week.

●

Field Service

– COZZIA customer service department will diagnose and

schedule an authorized service provider to repair the chair in the

consumer's residence.

●

Parts

- All parts deemed necessary for repairs will be shipped to the

consumer at no charge by the COZZIA service department.

Canadian consumers may contact COZZIA's customer service department at

1-877-977-0656

between 9:00 am and 5:00 pm PST, Monday through Friday for

warranty or service issues.

CONSUMER WARRANTY LIMITATIONS AND EXCLUSIONS

● Warranties are only valid in the 48 contiguous United States and Canada

and are contingent upon the consumer operating the chair according to the

corresponding instruction manual.

● The warranty only applies to COZZIA products and does not include any

accessories or enhancements.

● Field service requires pre-approval and must be performed by COZZIA’s

authorized field service personnel. Field service is only available in the

United States and in major metropolitan areas in Canada.

● Softening of foams and filling composites in pillows, pads, and memory

foam occurs naturally and does not constitute a defect under this warranty.

● Fading, wear and piling of fabrics occurs naturally and does not constitute

a defect under this warranty.

● Natural markings, grain and dye variations in leather do not constitute a

defect under this warranty.

● Warranties do not cover any loss or damage resulting from improper

installation, unauthorized repairs or modifications, improper use of

electrical/power supply, loss of power, dropped product, a malfunction or

damage of an operating part from failure to provide manufacturer's

recommended maintenance, transportation damage, theft, abuse, misuse,

neglect, vandalism or environmental conditions (fire, floods, rust, corrosion,

sand, dirt, windstorm, hail, earthquake or exposure to weather conditions),

loss of use during the period the product is at a repair facility, or otherwise

awaiting parts or repair.

● Damage due to shipping and handling does not constitute a defect under

this warranty.

● Under no circumstance shall COZZIA or its representatives be liable for

indirect, consequential, or incidental damages (including damages for lost

profits, business interruption, bodily injury, medical and the like), even if

any party has been advised of the possibility of such damages.

● Warranties are non-transferable and shall be in lieu of any other warranty,

express or implied, including but not limited to any implied warranty or

merchantability or fitness for particular use.

● COZZIA’s sole liability and the purchaser's exclusive remedy shall be for

the repair, or at COZZIA’s option, for the replacement of the defective part.

Not withstanding the above, if replacements parts for defective materials

are not available, COZZIA reserves the right to make substitutions in lieu

of repair or replacement.

● All warranties begin on the DATE OF PURCHASE; no allowance or

extension is offered for delivery and/or installation.

●

Warranties do not apply to rental, business, commercial, institutional or

other non-residential users.

Product Serial No. (located on product):

Purchase Price: Model No:

Date Purchased:

First Name: Last Name:

Address:

City: State: Zip:

Phone:

Email:

Please mail to: Cozzia USA LLC

1102 John Reed Court

City of Industry, CA, 91745

Tel: 1-877-977-0656

Fax: 1-800-521-4712

WARRANTY REGISTRATION FORM

Warranty Card

● Do not use water and other cleaning detergents on the massage chair.

● Do not stack, stab, slit or harshly pull on the surface of the massage chair.

●

Gently press the buttons during operation and avoid hitting the buttons with hard objects.

● Pull out the power supply plug after each use.

● Do not use the massage chair for more than 30 minutes at a time.

●

DO NOT position any body part in between the gaps of the leg rest when the automatic leg

extension feature is in operation as demonstrated PIC 1, in order to prevent pinch to you.

Note: If you are remiss to position any body part in between the gaps of the leg rest,

please press PAUSE button to stop and then get your body part out rapidly as

demonstrated PIC 2.

● DO NOT attempt to press the ON/OFF button to stop, as when we press this button,

the footrest will automatically shrink its original position and may cause much tighter

pinch.

● If you have to rise from the chair to stop accident, injury or damage to others by you

or you want to get your feet and calves out when the automatic leg extension feature is

in operation, please press PAUSE button to stop as demonstrated PIC 2, the footrest will

gradually deflate in some seconds and then quickly get your foot and calves out and rise.

Note: This way as above mentioned just using in emergencies.

Please bear in mind that always return the footrest to its original length and restore it to

its original position, then rise from the chair in order to prevent accident, injury or damage

to yourself and chair.

PIC 1

When using the massage chair, basic precautions should always be followed to

reduce the risk of electric shock, burns, fire or injury to persons. Please read the

following precautions before using the massage chair.

Make sure the power plug is securely inserted into a proper electrical outlet to

reduce the risk of short-circuit and fire.

Always unplug the massage chair from the electrical outlet immediately after

using and before cleaning.

DO NOT use the massage chair in areas where the humidity is high such as a

sauna or steam room.

DO NOT use the massage chair outdoors and avoid areas with direct sunlight.

If the electricity is off, turn the power switch to the OFF position and unplug the

massage chair from the electrical outlet to prevent any damages to the chair

when the electricity comes back on.

Never plug/unplug the power cord plug socket with wet hands.

Close and continuous supervision is necessary when the massage chair is used

by, on or near children or disabled persons.

No more than one person should use the massage chair at a time.

The massage chair is intended for use as described in the Instruction Manual.

Do not use any attachments other than those recommended by COZZIA.

DO NOT attempt to stand or sit on the backrest, armrest or footrest in order to

prevent accident, injury or damage to the chair.

Avoid falling asleep while using the massage chair.

Always keep the massage chair clean, and never insert any objects into or

around the gaps of the massage chair.

DO NOT move the massage chair by pulling on the power supply cord.

Make sure there are no children, pets or other obstacles behind or underneath

the massage chair.

If you find any rips or tears in the fabric of the massage chair contact the COZZIA

service department and stop using the chair immediately.

This massage chair is designed for household use and should not be used in

non-residential settings.

Please consult your doctor if you are in doubt as to whether or not you should

use this massage chair.

Please consult a doctor before using the massage chair if you are pregnant,

undergoing any medical treatment, using a medical electronic device such as a

pacemaker, or are experiencing any of the following: Malignant tumor, heart

disease, back pain, abnormal or curved back bone, osteoporosis or acute illness.

If you experience pain while using the massage chair, stop using the chair

immediately and consult your doctor.

Never use a massage function on swollen or inflamed parts of the body.

DO NOT use the massage chair for more than 30 minutes at a time.

DO NOT use the massage chair where aerosol (spray) products are being used

or where oxygen is being administered.

This massage chair is a non-professional product designed to provide a comfortable

massage and should not be substituted for appropriate medical treatment.

Never operate the appliance with the air openings blocked. Keep the air openings

free of lint, hair, and the like.

Temperatures sufficiently high to cause burns may occur regardless of the control

setting. Do not use on an invalid or on a sleeping or unconscious person. Check the

skin in contact with the heated area of the appliance frequently to reduce the risk of

blistering.

Burns may result from improper use.

Do not crush-avoid sharp folds.

Keep children away from extended foot support (or other similar parts.)

DO NOT WET-DO NOT USE PINS.

NEVER REMOVE COVER.

Safety Precautions

Use the diagonal pliers to cut off the cable tie which binds the stopper of the

backrest, and take down the packing material of the backrest actuator.

Inhaltsverzeichnis

Seite 1 - Warranty Card

256789232221 1011 2019 1213 1817161514Table of ContentsThank you for purchasing the EC-366 Spa Massage Chair.Before using your massage chair, please r

Kommentare zu diesen Handbüchern

Keine Kommentare

Cozzia EC366 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Möbel Cozzia EC366 herunter. Cozzia EC366 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern